PA-622 Current Probe

The PA-622 current probe enables a general purpose oscilloscope to display AC and DC current signals up to 100 amps Peak (70A RMS). The PA-622 current probe can also make AC and DC measurements with a multimeter by using the recommended accessory (BNC-to-banana) plug adapter.

Features

• Max. ±100A DCA
• Resolution: ≥10mA
• Bandwidth: DC~300kHz
• Rise Time: 1.2μs
• Overrange Function
• 10mV/A, 100mV/A Range
• Adaptor/Battery Input
• Separating Design,Convenient Durable

Specifications

Max. DC A Current	± 100A DC
Max. AC A Peak	200A p-p
Max. AC A RMS	70A rms
Range Selection Division	2 Range 10mV/A；100mV/A
Max. Sensitivity	10mA
DC Accuracy Typical	±3% ±50mA at 100mV/A (50 mA to 10A peak range) ±4% ±50mA at 10mV/A (500mA to 40A peak range) ±15% max at 100mV/A (40A peak to 100A peak range)
Frequency Range	DC to 300kHz (-3dB)
Rise Time	1.2μs (Typ.)
Battery Type and Life, typical	9V NEDA 1604A, IEC 6LR61 13 hours minimum (1 each)
Max. Working Voltage Max Floating Voltage	300V CAT III 600V CAT II
Cable Length	100 cm (3.3 feet)
Maximum Conductor Size	11 mm (0.43 inch)
Weight	260 g (9.5 oz) (without battery)

Accessories

• An Insulated BNC/BNC lead, length 100cm
  
• AC Adapter
  
• Connector BNC to Banana
  
• Instruction Manual
  

PA-622 Current Probe - Controls Enlarge		PA-622 Current Probe - Connection Enlarge		PA-622 Current Probe - Sensitivity Enlarge
PA-622 Current Probe - Battery Enlarge		PA-622 Current Probe - Accessories Enlarge