|
AAE-2712 Dual-Channel Smart Controller
|
|
Multifunctional module designed for the operation in laboratory, office, home automation systems for building of control systems. Analog-to-digital input channels: 2. Input terminal type: audio (stereo), diameter: 0.2 in / 3.5 mm. Input Impedance: 10 kΩ. Analog signal range: 2.048 V (DC or AC – rms velue). Maximum input voltage: 5V. Converter digit capacity of 10 binary digits. Maximum frequency conversion for each channel: 5 times per second. One digital channel (4-wire, I˛C type interface). Input terminal type (construction): mini USB, there are +5 V signals in the connector, general (ground). Interfaces to transfer the measured data and to control the module: USB 1.1, LAN |
|
|
ACE-1748 Input-Output Module
|
|
8-channel USB / LAN input-output module. Input resistance: 1.2 kOhm. Operating input current: 3 mA / max 50 mA. Max. input voltage (reverse): 6 V, operating direct: 48 V. Min. input operate voltage: 3.6 V. Input operational delay time of the module: 10 ms. Module outputs are made as metal-oxide-semiconductor relay with triggering/releasing time less than 3 ms. Output operation time of the module: 10 ms. Output resistance (“off” status): more than 10 MOhm. Output voltage (max): 60 V. Operating output current: 130 mA. Transmission resistance (closed status) of metal-oxide-semiconductor relay: not more than 25 Ohm |
|
|
ACE-1768 Input-Output Module
|
|
8-channel USB / LAN input-output module. Input resistance: 1.2 kOhm. Operating input current: 3 mA / max 50 mA. Max. input voltage (reverse): 6 V, operating direct: 48 V. Min. input operate voltage: 3.6 V. Input operational delay time of the module: 10 ms. Module outputs are made as metal-oxide-semiconductor relay with triggering/releasing time less than 3 ms. Output operation time of the module: 10 ms. Output resistance (“off” status): more than 10 MOhm. Output voltage (max): 60 V. Operating output current: 130 mA. Transmission resistance (closed status) of metal-oxide-semiconductor relay: not more than 25 Ohm |
|
|
AEE-2025 Crosspoint Switch
|
|
Crosspoint switch. It’s designed as an attachment to a computer (PC). The switch can be controlled programmatically by computer via USB interface or remotely via 10/100BASE-T (LAN) network interface. Weight: 0.20kg / 7.05oz. Dimensions: 150x85x35mm / 5.9x3.3x1.4in |
|
|
AEE-2085 Crosspoint Switch
|
|
Crosspoint switch. It’s designed as an attachment to a computer (PC). The switch can be controlled programmatically by computer via USB interface or remotely via 10/100BASE-T (LAN) network interface. Weight: 0.21kg / 7.41oz. Dimensions: 150x85x35mm / 5.9x3.3x1.4in |
|
|
AEE-2087 4-channel Crosspoint Switch
|
|
Matrix switch box with electronic control. This is an add-on unit to a computer (PC). Software-based switching control is made by USB interface or remotely through the network interface 10/100BASE-T (LAN). Number of inputs: 1…7 (selected by user). Number of outputs: 1…7 (selected by user). AEE-2087 allows commutating: X1-Y1, X2-Y2, X3-Y3, X4-Y4. Type and max. voltage value of the switched circuit: direct, alternating (peak-to-peak): 10 mV…300 V. Max. Current value of the switched circuit: 3.0 A. Ma. Frequency of the switched signal: 100 kHz. Interface: USB 1.1 (12 Mbit/s), Ethernet 10/100BASE-T. Dimensions: 5.9 x 3.4 x 1.4 in / 150 x 85 x 35 mm. Weight: 7.4 oz / 0.21 kg. |
|
|
AME-1274 Multichannel Thermometer
|
|
AME-1274 is a compact electronic device for the remote multichannel control of the temperature in the range from -55 up to +125 °C in PC housing, residential and industrial buildings, for temperature monitoring of technological facilities etc. |
|
|
