AKTAKOM Power Manager Light (APM Light)

APM Light (AKTAKOM Power Manager Light) is an application software to control Aktakom Power Supplies from a computer using an USB cable or a local area network (LAN).

Compatible with: APS-1602LS DC Power Supply 60V / 2A 1 Channel, APS-1721LS DC Power Supply 120V / 1A 1 Channel, APS-3103L DC Power Supply, APS-3320L DC Power Supply, APS-3320LS DC Power Supply Remote Controlled 600W 30V / 20A 1 Channel programmable, APS-7203 Programmable DC Power Supply, APS-7205 Programmable DC Power Supply, APS-7303L Programmable DC power supply, APS-7305L Programmable DC Power Supply, APS-7306L DC Programmable Power Supply, APS-7306LS DC Programmable Power Supply, APS-7313 Programmable DC Power Supply, APS-7315 Programmable DC Power Supply, APS-7612 Programmable DC Power Supply

For Windows^®
Supported OS: Windows XP x32, Windows XP x64, Windows 7 x32, Windows 7 x64, Windows 8 x32, Windows 8 x64, Windows 8.1 x32, Windows 8.1 x64, Windows 10 x32, Windows 10 x64
Discontinued software
Replaced by: Aktakom Power Manager Max

Aktakom Power Manager Light software is designed to remotely control AKTAKOM power supplies listed in the compatibility list.

Aktakom Power Manager Light software provides control of output voltage and stabilization current in arbitrary (manual) mode.

The application works within a single main window. The main window consists of several blocks.

The "Connection" block allows you to find available devices and connect to the device (the connection is made automatically when the program starts).

The "Measurement" block displays the voltage and current.

The "Control" block allows setting the output voltage and current stabilization.

Standard package

The software in the standard package of the device has no physical media (CD) and can be downloaded at www.tmatlantic.com after the purchasing and registering the equipment with a serial number. This software is not free however its cost is included into device value.

Frequently Asked Questions

How to install Aktakom Power Manager Light software?

How to install Aktakom Power Manager Light software?
To install Aktakom Power Manager Light run APMLt_Setup.exe and follow the installer instructions: Click “Install”, the installation process will be launched To complete Aktakom Power Manager Light software installation your computer must be restarted. Chose "Reboot now" and click “Finish”: Up

ALL RIGHTS RESERVED. AKTAKOM™ software is protected under International and Federal Copyright Laws and Treaties. Any unauthorized copy, reprint or use of this material is prohibited. No part of this software may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system without express written permission from the author / publisher.

Windows, Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Back to the section