News & Events

New clamp meters from AKTAKOM!

Our catalogue includes now a new clamp meter model – AKTAKOM ATK-2200. This all-purpose and reliable digital power clamp allows user to measure current and voltage strength as well as the value of active, reactive and full power in three-phase circuit of three- or four wires, balanced termination three-phase circuit, one-phase circuit of two- or three wires. These features make this power clamp perfect for electrical technician or power engineering specialist.

New AKTAKOM ATT-2593 Electrosmog meter

The range of our AKTAKOM electrosmog meters has been replenished with a new model – ATT-2593. AKTAKOM ATT-2593 electrosmog meter is a handheld device used to safely measure electromagnetic field characteristics with isotropic method in the frequency range of up to 8 GHz.

AKTAKOM APS-1915 power supply. How it should be used?

AKTAKOM APS-1915 is a high voltage DC regulated power supply designed for the use when producing high voltage electronic devices, in debugging processes, repair or during laboratory research. This power supply provides adjustable high DC voltage.

New AKTAKOM APS-5310 power supply!

Model range of AKTAKOM power supplies includes now a new low-cost model – APS-5310. The present model is developed with the same housing and form factor as popular AKTAKOM APS-5305 switching power supply. These devices are designed for supplying radio equipment with stabilized voltage or current when operating in debugging processes, repair or during laboratory research. One channel of new APS-5310 has a capability to smoothly adjust the voltage at the range of 0 to 30 V and the current from 0 to 10 A (APS-5305: 0 to 5 A).

New! Aktakom DMM Pro software for multimeters

Aktakom DMM Pro software is designed for the full-scale control of Aktakom AM-1142, AM-1152, AMM-1130, AM-1171 digital multimeters. This software due to its wide range of capabilities to process the measurement data can turn an ordinary multimeter or several multimeters and a PC into efficient multichannel and multifunctional sistem.

New! Aktakom DMM Light software for handheld multimeters

Aktakom DMM Light software is designed to enter the current value into PC, to display it and the measurement history as a table or graph defining max, min and average values, to proceed and save the data received from AKTAKOM AMM-1130, AM-1142, AM-1152, AM-1171 multimeters into files.

NEW! Clamp meter AKTAKOM ATK-2011

AKTAKOM ATK-2011 is a multifunctional AC clamp meter with a wide measuring range. Flexible magnetic conductor of ATK-2011 (about 6.7in / 170mm) is used for AC measuring up to 3000 A as well as allows readings in hard to reach areas and wire bunches. AKTAKOM ATK-2011 can record to the built-in memory up to 8000 logs.

New! AKTAKOM AEL-8320 Programmable Electronic Load

Our Catalogue includes a new programmable power supply model – AKTAKOM AEL-8320. This new programmable electronic load is designed to operate as a load when testing, setting and adjusting power units, amplifiers, sound-reproducing equipment and other radio assembly equipment with supply voltage of up to 80 V, up to 30 A load current, up to 250 W power consumption.

New power supply model – AKTAKOM APS-1915

There is some updating in our Catalogue in Power supply product range - AKTAKOM APS-1915, our new model.

AKTAKOM ATK-4001 clamp meters. Frequently asked questions

AKTAKOM ATK-4001 clamp meter is designed for grounding resistance, leakage current measuring as well as for continuity test. This model allows user to take measurements only on one ground wire without using any additional electrodes, also ATK-4001 can be used to test multiple grounds systems without turning them off.