News & Events

AKTAKOM non-invasive AC sensors

AKTAKOM AME-8821-xx series consist of several non-invasive AC sensors equipped with a current transformer used on the basis with a split ferrite core. It’s recommended to use it for current measuring monitoring as well as for power efficiency control.

AKTAKOM APS-3103L programmable DC power supply

AKTAKOM APS-3103L is a programmable power supply with adjustable current limit. This model is equipped with a large display showing voltage and current readings. Push button switch allows connection and removal of load...

Easy-to-use AKTAKOM APS-1503 power supply

AKTAKOM APS-1503 DC power supply is used to supply radio equipment with stabilized voltage or current when operating in debugging process, repair and laboratory research.

Precise and reliable AKTAKOM AM-1083 multimeter

AKTAKOM AM-1083 is a stable and battery-driven 3 1/2 digital multimeter. It is equipped with a large LCD clearly displaying the device measuring values. This multimeter can be used to measure DCV, ACV, DC, AC, resistance, capacitance, inductance, diode, triode, open circuit, temperature and frequency, as well as hold peak value. One of the features is the availability of overload protection.

AKTAKOM ASE-1102 durable soldering station

AKTAKOM ASE-1102 is a professional temperature controlled soldering station which is especially recommended for transistors and microchips assembly produced in accordance with CMOS technology. The temperature can be easily regulated with a rotary switch on the front panel.

Different types of grounding equipment from AKTAKOM

To protect electronic circuits when working with electronic components, boards and devices from potential danger it’s necessary to use protective ground equipment. AKTAKOM keeps a wide range of antistatic tools and equipment for this purpose.

AKTAKOM AMM-1009 low cost multimeter with up to 20 A current range

In case you are looking for reliable solution to diagnose automotive equipment AKTAKOM AMM-1009 general purpose digital multimeter can be considered good decision therefore.

Dual channel function/arbitrary waveform generator AWG-4150 from AKTAKOM

AKTAKOM AWG-4150 generator is designed using direct digital synthesis (DDS) technology which ensures high frequency accuracy, low distortion, a fast transition from one frequency to another and lots of other high metrological parameters. AWG-4150 represents both function and arbitrary waveform generator.

AKTAKOM ACM-6060 Phase rotation tester

One of the important parameters of three phase networks is phase interlacing. Disregarding of this parameter can cause the equipment failure. AKTAKOM ACM-6060 Phase rotation tester is used to control the correct connectivity of three phase equipment before the installation and during the test operation.

AKTAKOM ATE-1034 thermoanemometer. Record the results to SD-card in real time

AKTAKOM ATE-1034 hot-wire anemometer-thermometer is a compact device with wide functionality. Due to the small diameter of its probe (only 12 mm) this device is very convenient for using in hard-to-reach areas. Moreover the probe handle is extension-type (from 280 to 940 mm) which makes it possible to broaden the ranges of this anemometer use.