News & Events

High performance power supply for laboratory research

AKTAKOM APS-7205 is a high performance 3-channel DC remote controlled programmable power supply which is designed to power radio devices with stabilized voltage or current and it is indispensable when testing the reaction of electronic equipment to the supply voltage changes.

Aktakom ATK-2200 – clamp meter for power factor measurement

All-purpose and reliable Aktakom ATK-2200 digital power clamp allows user to measure current and voltage strength as well as the value of active, reactive and full power in three-phase circuit of three- or four wires, balanced termination three-phase circuit, one-phase circuit of two- or three wires. These features make this power clamp perfect for electrical technician or power engineering specialist.

AKTAKOM ASE-4313 multifunctional soldering rework station – good solution for any repair and soldering task

AKTAKOM ASE-4313 multifunctional soldering rework station is designed for a wide range of repair works and it represents 3 devices in one. Powerful embedded vacuum pump has throughput capability of up to 150 l/min and the commutatorless motor provides a low noise level.

AKTAKOM AEC-3536 ESD PU foaming chair

AKTAKOM has a wide range of ESD-safe chairs and we are ready to introduce one of them – AEC-3536 ESD PU foaming chair

AKTAKOM ATA-2504 clamp meter-adapter with 3 measurement modes

AKTAKOM ATA-2504 is a 2-in-1 model, it’s a compact clamp meter and adapter in one housing. If you connect it to a multimeter the measurement results will be displayed on the display of this multimeter. In case of connecting ATA-2504 to an oscilloscope you will be able of researching a signal waveform.

Professional AKTAKOM ATE-1509 Light Meter. 400000 Lux becomes real!

Due to its unique measurement range (up to 400000 Lux) and auto data logger availability ATE-1509 light meter significantly extends the capabilities of AKTAKOM light meter family.

ESD-safe AKTAKOM AEC-3529 chair

AKTAKOM AEC-3529 chair with a soft seat and armrests is very comfortable and perfect for service centers, measuring and university laboratories, electronics production, office and home.

Antistatic wrist straps from AKTAKOM

As we know antistatic equipment is made for the control over electrostatics. AKTAKOM presents a wide range of antistatic wrist straps with high quality characteristics, low cost and which comfortably fit your wrist. They are AHT-5161, AHT-5163 and AHT-5165.

Comfortable Aktakom AEC-3528 ESD chair at a very attractive price!

When equipping modern electronics production it’s necessary to pay special attention to means of protection against electrostatic charging. A typical working place of an engineer or repair specialist should be not only structurally equipped, ergonomic, comfortable, but also equipped with necessary antistatic objects: chairs, desk mats, wristbands, tools, etc. Comfortable Aktakom AEC-3528 ESD chair would be a very good choice for your laboratory!

Compact device to test electric power quality. AKTAKOM ACM-3192

AKTAKOM ACM-3192 is designed for one-phase and three-phase network operation. When operating with one-phase network ACM-3192 is capable of making analysis both for two- and three-wire lines; and when operating with three-phase networks – three- and four-wire lines. ACM-3192 is an analyzer of electric power quality and it can calculate almost all parameters of power supply.