News & Events

ESD-safe AKTAKOM AEC-3529 chair

AKTAKOM AEC-3529 chair with a soft seat and armrests is very comfortable and perfect for service centers, measuring and university laboratories, electronics production, office and home.

Antistatic wrist straps from AKTAKOM

As we know antistatic equipment is made for the control over electrostatics. AKTAKOM presents a wide range of antistatic wrist straps with high quality characteristics, low cost and which comfortably fit your wrist. They are AHT-5161, AHT-5163 and AHT-5165.

Comfortable Aktakom AEC-3528 ESD chair at a very attractive price!

When equipping modern electronics production it’s necessary to pay special attention to means of protection against electrostatic charging. A typical working place of an engineer or repair specialist should be not only structurally equipped, ergonomic, comfortable, but also equipped with necessary antistatic objects: chairs, desk mats, wristbands, tools, etc. Comfortable Aktakom AEC-3528 ESD chair would be a very good choice for your laboratory!

Compact device to test electric power quality. AKTAKOM ACM-3192

AKTAKOM ACM-3192 is designed for one-phase and three-phase network operation. When operating with one-phase network ACM-3192 is capable of making analysis both for two- and three-wire lines; and when operating with three-phase networks – three- and four-wire lines. ACM-3192 is an analyzer of electric power quality and it can calculate almost all parameters of power supply.

Compact and user-friendly AKTAKOM ATE-8702 magnetic meter

AKTAKOM ATE-8702 magnetic meter (gaussmeter or teslameter) can be widely used to measure magnetic field parameters in industry, materials science, electrical engineering and laboratory studies. This model has expanded capabilities for large values measuring. Due to various measurement ranges it can be used for different measurement tasks.

AKTAKOM ATE-1537 Light meter with a datalogger function

Portable AKTAKOM ATE-1537 Light meter allows you to take fast and precise measurement of the illumination level from different light sources: day light, tungsten lamps, fluorescent and mercury lamps. ATE-1537 has a separate probe for easy operation in different measurement environment and real time SD memory card datalogger.

Extended precision of measurements with AKTAKOM AM-6007 milliohm meter

AKTAKOM AM-6007 milliohm meter is used to measure low values of resistance in circuits and their components, as well as contact resistance. Measurements are performed with 4-wire Kelvin clips that makes the measurement results much more precise.

How to connect test leads to IP67 of DMM Aktakom AMM-1028? Find the answer in this piece of news

Aktakom AMM-1028 is a good combination of easy-to-use functions, safety and reliability. It features IP67 dust and waterproof, True RMS, rugged design for heavy duty use.

AKTAKOM ATT-2590 infrared thermometer for contact and contactless measurements

AKTAKOM ATT-2590 IR thermometer is especially suitable when other temperature measuring methods are not acceptable.

AKTAKOM ATT-1004 Hot Wire Anemometer

AKTAKOM ATT-1004 anemometer with a sensor is designed to measure air velocity of 0.5-20 m/s. The telescope probe represents a glass thermistor placed in a small measuring head of 0.5in / 12mm diameter on a telescopic handle.