|
|
APS-3205 DC Power Supply
|
|
Double Adjustable Independed Channels + Auxiliary Channel DC power supply. Rated Output Voltage: 0~30V (Dual Channel, Adjustable). Rated Output Current: 0~5A (Dual Channel, Adjustable). Rated Output Power: 315W. 110-220V. Voltage/Current Accuracy: ±0.5%Rdg+2digits. Display resolution: 0.1V (Voltage) / 0.01A (Current). Ripple And Noise: ≤1mVrms. Load Regulation (<3A): ≤0.01%+3mV. Auxiliary Power Voltage: 5V. Auxiliary Power Current: 3A. Series Parallel Working Method: series adjustable rate <300mV; Ripple and Noise <2mVrms 5Hz-1MHz. Dimensions: 405x260x160mm/15.9x10.2x6.3in
Manuals:
|
|
The AKTAKOM APS-3205 is a highly reliable regulated DC power supply providing high precision and high stability. This model can be widely used in laboratories, electronics production lines, communications equipment repair. It’s a must have device for scientific research, production, teaching and other application.
Features
- High performance and efficient Power Supply
- All New International Design
- 0.01% High Regulation
- Four LED displays
- Constant Voltage and Constant Current Operation
- Low Ripple and Noise
- Overload and Reverse Polarity protection
- Current Limited Lower Voltage and Short Circuit Protection
- Power Strong Fan and Over Temperature Protection
- Ideal for Educational Institutions and Research Labs
- Nominal Voltage 110-220 V
Specifications
- Channels: Double Adjustable Independed Channels + Auxiliary Channel
- Rated Output Voltage: 0~30V (Dual Channel, Adjustable)
- Rated Output Current: 0~5A (Dual Channel, Adjustable)
- Rated Output Power: 315W
- Voltage/Current Accuracy: ±0.5%rdg+2dg
- Display resolution: 0.1V (Voltage) / 0.01A (Current)
- Ripple And Noise: ≤1mVrms
- Load Regulation (<3A): ≤0.01%+3mV
- Auxiliary Power Voltage: 5V
- Auxiliary Power Current: 3A
- Series & Parallel Working Method: series adjustable rate – <300 mV; Ripple and Noise – <2 mVrms 5 Hz-1MHz
- Dimensions: 405x260x160mm / 15.9x10.2x6.3in
Accessories
| APS-3205 DC Power Supply - front panel |
|
|
| APS-3205 DC Power Supply - rear view |
|
|
| APS-3205 DC Power Supply - Power cord |
|
|
|
Power supply controls
Frequently Asked Questions
Can APS-3205 (APS-3203) power supply be used to supply the amplifiers on operational amplifiers?
May I use AKTAKOM power supplies to charge accumulators?
| Can APS-3205 (APS-3203) power supply be used to supply the amplifiers on operational amplifiers? |
|
These amplifiers require bipolar power supply +15 V.
In APS-3205 (APS-3203) such bipolar power supply is provided by the connection of output sockets of two different channels in order to get a general output. Such a connection is very similar to the connection of two batteries to get a general power output.
It’s recommended to choose tracking – control mode in the power unit. In that case supply voltage change will be made simultaneously in two channels of the power supply and voltage in two amplifier arms will be the same respectively.
Up
|
| May I use AKTAKOM power supplies to charge accumulators? |
|
AKTAKOM power supplies can’t be used for accumulator charging since it may cause the accumulator breakage (recharge, electrolyte boiling, extra pressure of the internal gas which will lead to the accumulator explosion). Accumulators should be charged with the current source which controls the accumulator voltage and regulates the charging current accordingly. When the required accumulator voltage is achieved such type of source simply stops the charging process, its name is a charging device.
Up
|
Back to the section
|
|
